Page 39 of 46
Open the battery cover by digging out the gap in the bottom of battery cover with a
finger or something pointed.
x
Tilt the battery cover and remove the battery cover by lifting it up.
x
Remove the original battery and replace a new battery along the correct direction.
x
Place the battery cover and secure it in place.
10. Cleaning
and
Disinfection
The device is a precision photoelectronic instrument that shall be handled with specific
care. Please note following cleaning instructions:
x
Power off device before cleaning it.
x
Disinfect the control unit and charger station with the soft cloth with alcohol. Wait for
cleaning liquid to dissolve before power on and connecting the charger station and
USB cable to the control unit.
x
It is recommended to clean the optical lens with cleaning cloth or lens cleaning
tissue such as THORLAB Inc., (www.thorlabs.com) Lens Cleaning Tissue.
If the replacement for new eye-cup, disposable specula or new contact plate is needed,
please contact with manufacturer or your own retailer.
Clean the contact plate before each use for a new patient:
x
Disinfect the contact plate with soft cloth moistened with alcohol (70% ethyl
alcohol).
Note: The device is not intended to be sterilized.
11. Operation
Environment
x
Ambient
temperature:
0
ɗ
to +35
ɗ
x
Relative humidity:
10% to 80%
x
Atmospheric pressure:
700hPa ~ 1060hPa
12. Environment for Storage and Transportation
x
Ambient
temperature:
-10
ɗ
to +40
ɗ
x
Relative humidity range:
10% to 95%
Note: It is recommended to remove the battery if the device is stored over 2 weeks.
Summary of Contents for Horus Scope EZ-Horus 40
Page 1: ......