Components:
A. Brake
G. Handgrip
B. Push Handle
H. Backrest
C. Push Handle Hand Screw
I. Brake Cable
D. Backrest Bracket
J. Seat
E. Storage Bracket
K. Folding Mechanism
F. Rear Wheel
L. Front Wheels
Assembly Instructions:
A) Unpack Rollator
Remove rollator from its carton and unwrap all the parts
B) Install Push Handles
1) Stand the rollator upright and open the frame by pushing down on
the folding mechanisms until they are flat.
2) Insert the handlebars. Make sure the brake cables are on the
outside of the frame
3) For proper height adjustment, stand upright with shoulders relaxed
and arms at your side. Handles should be at the height where you
would wear a watch.
4) Secure the handlebars by inserting the hand screw into the hole in
the frame. The hand screw should be flush with the frame. Hand
tighten only.
3
