REMOTE CONTROL
EDID SETTING
The remote control can be used to
turn on and off the matrix and switch
the HDMI source for each output.
Note
：
•
Please remove the insulation
slice before use.
•
Please make sure the remote
is pointed directly at the IR
receiver windown.
DIP switch setting Function DIP switch setting Function
Note: Other options about EDID setting, please kindly use the API
commonds(Refer to the last section API Commands list).
Pass through- learning
EDID from HDMIOUT B.
HDMI OUT A downscaler
from 4K to 1080P.
Set EDID:
1080P@60Hz_2CH
_3D_HDR
Test Mode - Improve
compatibility.
Set EDID:
4K@60Hz_4:2:0_5.1CH
_3D_HDR
Set EDID:
4K@60Hz_4:4:4_5.1CH
_3D_HDR
Summary of Contents for EZ-MX42PRO-HAS
Page 12: ...EZCOO It s easy Just cool ...
