FIG.1.2 Rear Panel View
HDMI IN1
: HDMI input port1
HDMI IN2
: HDMI input port2
HDMI OUT
: HDMI output port
: Power on/standby
INPUT:
Source selection key
IN1:
Select the HDMI IN1 input
IN2:
Select the HDMI IN2 input
WiFi:
Select WiFi input mode
(Note: Use after the battery separator film is pulled out)
FIG.1.3 Remote Panel View
OPERATIONG AND CONNECTION
:
1. Connect one HDMI cable from DVD/BD output into the adapter HDMI input.
2. Connect one HDMI cable from each display (monitor or projector) into the adapter HDMI output.
3. Insert the external IR receiver into the IR IN jack.
4. Connect 5V power supply to the adapter and inserted into the power socket.
5. Power on and use of select key or remote controller to select the input signal source.
6. When you first time using Airbridge WIFI HD Adapter, you need to install client software on your
PC/ PAD/ mobile phone.
HDMI IN1
HDMI IN2
HDMI OUT
文件使用
"pdfFactory Pro"
试用版本创建
