EZCast Beam J2, Quick Start Manual, Page: 2 / 23

How to use the projector:
（
1
）
Do not point the projector lens towards human eyes. The bright light can cause
damage to eyes.
（
2
）
Do not block the air vents. Blocked ventilation may cause overheating and
damages to the projector electronics and components.
（
3
）
Do not use chemicals, detergents or water to clean the projector. Moisture and
chemicals may corrode the projector circuit boards.
（
4
）
Do not place the projector within reach of children.
（
5
）
Only use the projector in dry environment with good ventilation.
（
6
）
Do not store the projector in extremely hot or extremely cold temperatures.
Extreme heat and cold can reduce the component lifetime of projector. Recommend-
ed working environment is between 5
℃
~35
℃
.
（
7
）
Do not attempt to dry the projector in heating devices, such as dryer,
microwave etc.
（
8
）
Do not squeeze or apply excess pressure to the projector. The projector may
be damaged from the pressure.
（
9
）
Do not throw, knock or shake the projector. The projector may be damaged
from the vibration.
（
10
）
Do not attempt to open the projector. Please refer to qualified customer
support.
（
11
）
Do not attempt to service the projector. Please refer to qualified customer
support in the event of projector malfunction.