EZ Way, Inc. 800-627-8940
EZ Matt User Manual Document# AMT100601 August 12, 2005
Washing Instructions
Between patient use the mattress and sheet may be wiped down with any properly diluted EPA
approved germicidal cleaning solution or quaternaries; alcohol (70% isopropyl of Ethyl). The
cleaning solution should be sprayed on or applied with paper towels or disposable cleaning
cloths using hospital protocol for bed mattresses. After removing all potentially infectious
materials, wipe up excess solution and allow surface to dry. Always wash hands thoroughly
after cleaning the mattress or protective sheet.
If the mattress or sheet becomes badly soiled it can be laundered in cold or warm water with any
hospital approved non-alkaline detergent. Temperature of water is not to exceed 155ºF. It is
acceptable to use a 1:10 bleach:water solution in the laundering of the mattress.
It is recommended that the EZ Matt mattress be air-dried. If using a steam dryer, tumble dry on
lowest setting not to exceed 100ºF. Do not iron. The heat of the iron will cause damage to the
mattress and protective sheet.
Technical Specifications
Mattresses
Weight 3.5 lbs including protective sheet
210/T Poly, PVC coated, Water resistant, Anti-static, non-latex
32” wide, 78” long (Large) / 46” wide, x 78” long (Bariatric)
Hole pattern on bottom of mattress 3 5 5 5 3
Total of 21 holes per line, 96 lines per mattress
From air intake hole to the edge of air holes = 19 1/2” +/- 1”
No weight limit
Protective sheet
36” wide, 79” long (Large)
54” wide, 82” long (Bariatric)
Air Supply
110 VAC, 50/60 Hz, 1200W
Power cord – medical grade SJT 3-18 Type
Weight 19.5lbs
