Assembling Your Rink | PRO Stability Kits
Small PRO Stability Kit
Required for rinks with 20+ feet of Arena Height Boards/PRO Netting
•
Space your Small Stability
Kits evenly throughout portions of your rink with Arena Height Boards and/or PRO Netting. There
should be no more than one straight board between any two Small Stability Kits. Small Stability Kits should be placed roughly
every other straight board. No Stability kits are required near the corners of the rink.
•
Place the Small Stability Kit (as pictured) in the center of
a set of Arena Height Boards.
Fill all
Stability Kits
with water nearly
to the top (about 90% full to allow room as the water freezes).
Securely cover all
Stability Kits
to
ensure the water does not
leak.
•
Use the provided strap with metal buckle to secure your Arena Height Boards to the handles of the Small
Stability Kit. The
strap should travel through
the board handle, through the handles of both Small
Stability Kits.
•
Make sure that the strap is very tight by pulling on the loose end.
Large PRO Stability Kit
Required for rinks with 35+ feet of Arena Height Boards/PRO Netting
•
Space your Large Stability
Kits evenly throughout portions of your rink with Arena Height Boards and/or PRO Netting.
There should be no more than four straight boards between any two Large Stability Kits. No Stability kits are required near
the corners of the rink.
•
Place the Large Stability Kit (as pictured) in the center of a set of Arena Height Boards.
Place two Small Stability Kits on
either side of the Large Stability Kits. Fill all
Stability Kits
with water nearly to the top (about 90% full to allow room as the
water freezes).
Securely cover all
Stability Kits
to
ensure the water does not leak.
•
Use the provided strap with metal buckle to secure your Arena Height Boards to the Large Stability Kit. The strap should
travel through
the board handle, through both Small
Stability Kit handles, and twice around the Large
Stability Kit.
•
Make sure that the strap is very tight by pulling on the loose end.
