19
11.11.10 L0 Break Point
The layer 0 break point is the place to switch from the first layer (L0) to second
layer (L1). Duplicator allows user to set option for this breaking point.
By Source
(default)
: Duplicator will burn the breaking point to target disc,
following by break point place of source disc.
Optimization
: Duplicator will automatically generate an optimized place and
burn the breaking point.
Press ENT to continue
Press ▲▼ to select mode
Press ENT to confirm
11.11.11 Show Result Time
Allow the total result time to display on LCM. The default is
Disable
Press ENT to continue
Press ▲▼ to select choice
Press ENT to confirm
11.11.12 Performance
Allow user to set priority of burning for performance.
Speed
(default)
: duplicator can provide maximum data transfer rate.
Compatibility:
can provide maximum range to work but less transfer rate.
Balance
: duplicator will maintain copy’s Compatibility but keeps its speed as
possible.
ENT
ENT
11. Setup
[ Setup ]
11. Advance Setup
[ Advance Setup ]
10. L0 Break Point
[ L0 Break Point ]
By Source
ENT
ENT
11. Setup
[ Setup ]
11. Advance Setup
[ Advance Setup ]
11. Show Result Time
[ Show Result Time ]
Disable
