duplicator can asynchronously execute a task if Asynchronous Mode is enabled.
a. Insert source device into the source channel, select the task to execute from the menu,
and press ENT button. Duplicator will start to execute the task now.
b. Target devices can be plugged in during the execution process, and will start to execute
the task immediately
c.
Target device can be removed when it finishes the execution process and its green LED
is solid on. New target device can be plugged into the same channel for execution of the
task again.
d. LCD display will show the percentage of execution process, the number of successful
and failed target(s). Here the percentage of execution process displayed is only for the
least processed target device.
e. During the execution process, the status of each target device can be checked by using
the ▲ and ▼ buttons.
f.
After the task is done for all target devices, press ESC button to exit from the task. LCD
display will show the total number of successful and failed target(s).
g. Don’t need to wait for all target devices to be done. Each channel executes the task
asynchronously.
6
