4. Do not place liquid-filled containers on top of this instrument.
A spill could seriously damage the instrument.
5. Do not use this instrument where it is subject to serve viration,or strong blows.
6.Do not place heavery objects on the case,or otherwise block the ventilation hole
7. Do not use this power supply in strong magnetic fields,such as near motors.
8. Do not insert wires , tools , etc. through the ventilation holes.
9. Do not leave a hot soldering iron near the instrument.
10. Do not place this instrument face down on the ground, or damage to the knob
may resuit.
11. Do not connect other power source to + ,- of the output terminal.
12. Ground terminal of power code must connect to the ground.
13. According to output porarity, it solved problem ESD and Floating voltage using
the connect ground port to terminal of output .
14. To connect the ground, be careful at ground porarity of load.
15. Input voltage of instrument must be equal to AC power voltage.
16. It use to thick and short wire of output terminal in possible.
3-3. Cleaning
1. To clean stained casing, lightly rub the stained area with a soft cloth dipped in a
neutral detergent.
2. If the surface of the panel is dirty, use the same method to clean.
If the panel is heavily stained, rub the affected area lighty with a soft cloth soaked
in light neutral detergent or alcohol.
3. Never use highly volatile material such as benzene or paint thinner.
[5]
