![background image](http://html1.mh-extra.com/html/ez-access/travwk/travwk_instructions_2458033002.webp)
10275 REV 06-03-14
3-year limited warranty (ramp only).
© EZ-ACCESS
®
, a division of Homecare Products, Inc. All rights reserved.
All text and images contained in this document are proprietary and may not be shared, modified, distributed,
reproduced, or reused without the express written permission of EZ-ACCESS.
Traverse Curbside Loading Ramp
with Optional Wheel Kit
INSTRUCTIONS
The EZ-ACCESS Traverse Wheel Kit (PN: TRAVWK) assists in the
handling of a ramp by allowing the ramp to roll in lieu of being carried.
Once installed in accordance with the instructions below, it is rated for
the weight of the ramp.
WARNING -
RATED LOADS
RAMP LENGTH
4’, 6’, 8’, & 10’
12’ & 14’
RATED LOAD
1,200 lbs.
850 lbs.
Install the EZ-ACCESS Traverse Wheel Kit prior to ramp use.
1.
Turn ramp on its side.
The TRAVWK Assembly can be installed on either side.
2.
Use a tape measure to locate the center of the ramp side rail,
and then mark the area using a felt tip marker, pencil, etc.
3.
Install by roughly aligning the center of the TRAVWK to the
center of the ramp.
Center-to-center location of the TRAVWK to the ramp is
not critical for proper assembly.
4.
Slide the wheel bracket under the hook of ramp’s side rail (as
shown in FIG. 2).
Ensure that the wheel bracket is firmly making contact
with the surfaces of the side rails.
5.
Secure the TRAVWK to the ramp using the two supplied ¼” self
drilling/tapping fasteners.
WARNING
Rated load: 1,200 lbs. for 4, 6, 8, & 10-FT lengths. Rated load:
850 lbs. for 12 & 14-FT lengths. Do not exceed rated load.
Once assembled (as shown in FIG. 3), please refer to ramp's
instruction sheet for proper ramp use, safety guidelines, etc.
Do not roll ramp on uneven or sloped surface.
Use with care as the TRAVWK may cause ramp to be unsteady
while rolling or while stored on edge (always secure ramp while
storing).
Never leave ramp unattended when TRAVWK is in use.
FIG 2
FIG 3