Page | 3
WARNING!
Rated load: 325 lbs.
NEVER EXCEED RATED LOAD
.
Use the TILT only with a qualified helper.
Manufacturer recommends professional installation and maintenance.
Read this manual in its entirety before installation. Understand and learn the location and function of all the
features, safety devices, and labels before operating. Correct installation, proper use, and following of
instructions and obeying safety warnings of the TILT are necessary for safe operation.
For residential use only.
For use with floor mount toilets only.
Observe and avoid all pinch points and always keep hands above the seat when operating the TILT.
Ensure that there is no interference within the TILT’s range of movement.
For safety purposes, it is important to wear footwear with firm, non-skid soles when using the TILT.
Ensure floor is not slick. Remove loose rugs and make sure that the area around the TILT is free of all
obstructions and moisture.
The TILT is strictly an assist lift. The patient must have dexterity, strength, and balance in order to use the TILT
safely. Non-responsive or combative patients may not be suited for the TILT.
Never use TILT with clothes on as the seat can be slippery!
Never modify the TILT or any of its components. Padded toilet seats cannot be used.
Periodic inspections by a qualified technician are recommended to help prevent unsafe conditions. Regularly
check that all parts are in good condition and verify all nuts, bolts, screws and other fasteners are undamaged
and secure. If any part of the system is damaged or loose, DO NOT USE until repairs can be made by a qualified
technician.
Do not use TILT for anything other than its intended purpose.
Do not route power cords near anywhere they may become damaged, pinched, create trip hazards, or cause
other safety concerns. Check all TILT cords frequently to be sure they are not worn or frayed. Stop using the
TILT immediately and contact your dealer for inspection, repairs, and service if any defect is suspected. DO
NOT patch a broken or damaged cord.
To reduce risk of shock and or electrical hazard, keep all electrical components free from moisture at all times.
Never play on or near the TILT.
Before and during TILT operation, ensure all hair, jewelry, shirts, ties, shoe laces, and all forms of clothing and
other personal ornamentation
are not
and
do not
hang up on anything that may create a hazard.
Maintaining all labels and manuals in legible condition is required by the TILT owner and is essential for safe
operation. Contact your dealer for additional information, replacement labels and manuals, or to schedule
inspections, repairs or service. For additional care, use or safety information, please call 1-800-451-1903 or
visit us at www.ezaccess.com.
NOTES
Information in this document is subject to change without notice. The most current version of this manual is
available on our website at www.ezaccess.com.
Before installation, ensure that there is enough space for proper TILT operation.
The TILT warranty is not transferable. Attempting to tamper with or modify any portion of the TILT will void
the warranty. Using the TILT for anything other than its intended purpose will void the warranty.
BOX CONTENTS
Open box and inspect contents for shipping damage before use. In case of damage, DO NOT USE the
Lift. Please call 1-800-451-1903 for further instructions.
Product is non-returnable if sealed bag that contains TILT is opened or altered.
TOOLS NEEDED
5/8” wrench
9/16” wrench
