Page | 3
SYMBOLS AND WARNINGS
The
WARNING
symbol indicates a potentially hazardous condition/situation. The warnings throughout this
document, and on your equipment, if any, are for the protection of people and property. Failure to abide by
warnings will result in a waiver of all liabilities, loss of your warranty, and could result in equipment damage and
or failure, property damage, risk of serious bodily injury, and or death to operators, riders, and those nearby. The
symbol may appear in various colors and in conjunction with other symbols.
The
NOTE
symbol indicates important information. Failure to obey all notes could result in improper operation,
less-than-optimum equipment performance, and at the sole discretion of the equipment manufacturer, may void
your warranty. The symbol may appear in various colors and in conjunction with other symbols.
WARNINGS!
Maximum weight capacity is 800 lbs.; never exceed weight capacity.
Prior to assembly and use, read and follow all instructions, warnings, and labels. Following all instructions and
obeying all warnings before and during use is necessary for safe operation. For additional information or to obtain
replacement copies of instructions or labels, call 1-800-451-1903.
For wheelchairs and scooters only; not for commercial use.
Before use, refer to your mobility equipment's owner guide for acceptable ramp usage, including proper
slope/incline, chair direction, etc.; never exceed its recommendations.
Only use the ramp with a qualified helper and always use a lap belt.
Before each use, check the ramp for worn, loose, or damaged parts. If you find any of these conditions, do not use
the ramp. Contact your dealer for service or repairs. Failure to do so may cause injury.
Do not use the ramp if it is damaged or unstable.
Do not tamper with, attempt to repair, or modify any portion of the ramp.
Use caution when folding and unfolding ramp to avoid all potential pinch points.
Ensure that the landing the ramp will be placed on is substantial and of sound construction.
Ensure that each top lip transition plate fully overlaps a secure, unobstructed, level landing enough to safely install
clevis pins or other anchoring hardware and rests firmly against the landing prior to use. If a secure, unobstructed,
level landing cannot be attained, do not use the ramp.
Ensure that the ramp is securely anchored before each use.
The ramp surface may be slippery in wet conditions; use caution if the surface is wet as traction may be reduced.
Do not use the ramp if its surface is covered with ice, snow, dirt, leaves, or other debris. Remove all accumulations
and sweep the surface clean before use.
Improper use of product could result in serious injury.
CARE AND MAINTENANCE
1.
Before each use, check the ramp for worn, loose, or damaged parts. If you find any of these conditions, do not
use the ramp.
Do not tamper with, attempt to repair, or modify any portion of the ramp.
2.
Keep the ramp surface clear of ice, snow, dirt, leaves, and other debris. For ice and or snow, remove all
accumulations and sweep surface clean. For dirt, leaves, and other debris, sweep surface or wash with a soft
bristle brush and non-alkaline detergent; rinse well.
The ramp surface may be slippery in wet conditions. Use caution if surface is wet as traction may be
reduced.
3.
Store the ramp in a cool, dry place when not in use.
GETTING STARTED
1.
Read this instruction manual in its entirety before use and follow all instructions before and during use.
2.
Before use, refer to your mobility equipment's owner guide for acceptable ramp usage, including proper
slope/incline, chair direction, etc.; never exceed its recommendations.
3.
Before each use, check the ramp for worn, loose, or damaged parts. If you find any of these conditions, do not
use the ramp.
4.
Confirm that all package contents are present. Open the shipping box and inspect for damaged or missing
parts. If damaged or missing parts are noted, do not use the ramp.
