EZ-ACCESS PASSPORT PL120SP3651, Installation Supplement Manual

Page: 10 / 22

Page | 10
3.2. CONNECTING BATTERIES
Confirm battery polarities before connecting wires.
3.2.1. Near the power head, locate the small blue polybag. Remove the zip-tie and then remove the wires
from the polybag bag (FIG. 3.5).
3.2.2. Connect the White #10AWG wire to the Negative terminal of Battery 1 (FIG. 3.5).
3.2.3. Connect the splitter with the 2 black wires (one #10AWG and one #16AWG) to the Negative terminal
of Battery 2 (FIG. 3.5).
3.2.4. Connect opposite end of black #10AWG to Battery 1 Positive terminal (FIG. 3.5).
Check all wiring connections before energizing or damage could result.
WHITE #10AWG ........................NEGATIVE/GROUND WIRE, GROUND CIRCUIT FOR MOTOR
BLACK #10AWG ............... BATTERY PARALLEL JUMPER WIRE, CREATES 24VDC FOR MOTOR
BLACK #16AWG ......................................................... 12VDC POWER FOR CONTROL CIRCUIT
RED #10AWG ............................................................ POSITIVE/HOT WIRE, MOTOR CIRCUIT
FIG. 3.5