Eyyes CarEye Safety Angle, Installation Manual, Page: 19 / 32

WWW.EYYES.COM
CAREYE
®
SAFETY ANGLE - TURN - ASSIST
INSTALLATION AND INSTRUCTION MANUAL
19 D
ELECTRICAL CONNECTION
GENERAL
■
The most cable sets are pre-configured and provided with
permanently mounted plug connections, do not shorten them:
□ Cable set signal element, an extension cable is optionally
available for this purpose,
□ Cable set Monitor,
□ Cable set Kamera.
■
The following cable sets can be shortened to the required length:
□ Cable set for power supply, shortening on the side of the open
end,
□ Cable set for steering angle sensor, shortening on the side of
the open end. The plug connection with spring clips for self-
assembly is included.
■
The following cable connections must be made during installation;
no cable sets are supplied for this purpose:
□ Turn signal if this is not available via the CAN bus. The plug
connection with spring terminals is preassembled on the side of
the TIC box.
□ CAN bus, the plug connections with spring terminals for self-
assembly are enclosed.
The enclosed connectors with spring clamps
allow easy assembly without tools. They are
designed for a
conductor cross-section of 0
.2 to 0.5 mm².
When using the spring terminals, make sure that no strands
or wires protrude from the body of the connector and that
the insulation extends into the connector.
!!