Controlling the Display
The Remote Control
The menu functions of the OSD menu can be accessed with the eyevis
Remote-Control (RC), see picture below.
(To use the RC aim at the display’s IR-Receiver)
Opening the On-Screen-Display (OSD)
►
Press the
MENU/EXIT
-Button to open the OSD Menu on the screen.
Navigating in the OSD
►
Use the arrow buttons
(
►/▼/◄/▲
)
to navigate through the menu.
►
Press the check mark button (
) to select a menu item.
►
Press
MENU/EXIT
to abort the current operation and return to the
previous menu.
►
For numerical values you can either use the up/down arrow (
▼/▲
) to
increase or decrease values or insert the values directly on the number
block. If using the arrow buttons for entering numerical values, holding the
keys pressed will toggle larger steps.
Special keys and key sequences
►
You can use the POWER button to activate Standby Mode.
You can reboot the display and read back saved settings at any time:
►
Press the sequence
BLUE
-
RED
-
YELLOW
(
) to trigger a reset on the
currently selected display.
)
NOTE:
•
Illustrated values may differ from your displayed OSD menu settings,
depending on the firmware version and connected signal sources.
•
Do not forget to select
Save
in the main menu if you want to save your
changes permanently.
EYE-LCD-8400-QHD-LE
28
User Manual
