19
USER GUIDE MANUAL
(6) Emergency button
This makes it easier for user to back up data set already from emergency button.
When emergency happens, it sends recording image through RMS and converting and saving.
Button automatically, you can choose only one among sensors.
< Scenario >
When no.3 camera works, all material from no.1.2
camera should be back up on D:₩
It should notify through RMS when sensor and
motion happens.
Setting method (refer to left)
(1) Enter into sensor on setting menu.
(2) Click No.3
‘
sensor
’
and check
‘
use
’
- Emergency button List -
(3) Check
‘
use
’
and designate the location and
click
‘
Browse
’
(4) Designate Event Backup Path (Real back up
location)
(5) Select camera (No. 1, 2 cameras)
* Recording material will be saved into when you
designate camera for back up.
(1) It should be motion (Event)
below screen will be turned if
sensor connects event.
(6) Click
‘
OK
’
network on setting menu.
(7) Check
‘
Notification
’
in
‘
Use
’
(8)
‘
OK
’
–
Save and Exit
◄
When sensor detects, alarm
*REF: Since Event happens, recording is on for 3minutes (Post 3minutes) previous
material (Pre 3minutes) will be Backup.
(2) This is a screen of back 3minutes
later in temporary back up path.
*REF: In case of Scenario, Emergency folder will be made in C:₩ drive and back
up in on. When Event backup turns up, it should be done before it will be
deleted.