CXL-365 vario
corneal cross-linking
1025_IFU_507536 CXL-365 vario_EN_Rev 09
Page 35 of 49
4.7.4
Interruption and continuation of treatment
The emission of the device can be interrupted by pressing the Start / Stop button while the
treatment.
The display will show “STOPPED” and the remaining time
(Figure 44). By a second
pressing of the Start / Stop-Button the illumination will be continued. Pay attention to the correct
illumination time.
Figure 44: Display after interruption of the treatment
4.7.5
End of Treatment
After 5 minutes the emission is switched off automatically with an acoustic beep. The Display shows
„END OF TREATMENT“ (
Figure 45: Display after treatment
The device now responds to no more keystrokes and can only be turned off by the Start / Stop
button. For demounting follow the steps in reverse order as previously described.
