QuickStart Guide
for GoPano 360° Optic
SHUTTERBUG SAM SAYS:
The BEST way to get the most out of your GoPano one shot system is to set your cam-
era (regardless of make or model) to M for manual. Then adjust the Shutter Speed to
the desired setting that is optimum for INSIDE and OUTSIDE photography.
TOO DARK. YUK!
The F-stop is fine, the Close Up is on. But
the image is too dark. The reason: The
Shutter speed is too fast. This image was
taken at 1/250th of a second which is
why the image is a bit dark.
BETTER, BUT STILL TOO DARK
You can see a bit more detail but this
image is still a bit too dark. The Shut-
ter speed was reduced to 1/60th of a
second, but as you clearly see, this
needs to be a longer exposure, not a
shorter one.
OOPS! TOO MUCH. OVER-EXPOSED
This is a full second and is resulting in
the room being over exposed. In some
rooms, 1 second will be perfect, but for
this shot, 1 second is just too much. Re-
duce your shutter speed a bit if you see
over exposed donut images like this.
PERFECT!
The shutter speed was reduced to
1/15th of a second and for the light in
this room, it resulted in a picture per-
fect shot. You will need to experiment
and write down settings that work for
you for both inside and outside shots.
