manualshive.com logo in svg

Eyemax IP POWER C Series, User Manual

Share
Download
Eyemax IP POWER C Series User Manual Download Page 30

Page 26 

IP CAMERA USER MANUAL 

 

 

5.  Select  the  MAC  address  which  needs  to  be  deleted  from  the  MAC  address  list  box  and 
click “delete” button to delete that MAC address.                     
6. Click "save" button to save the above setting. 
 

 

 

5.5.3

 

Configure Backup & Restore 

Go to Advanced configuration

Configure Backup & Restore Interface.   

 

 

Import & Export Configuration

: 

You can import or export the setting information from PC or to device. 
1. Click “Browse” to select save path for import or export information on PC. 
2.  You  can  import  or  export  all  setting  information  to  PC,  but  those  two  settings  “User 
Configuration” and “Network Configuration” are exceptional.   
 

 

 

 

Default Configuration 

Click “Load default” button to restore all system settings to the default status.

         

                                                                                                 

5.5.4

 

Reboot Device 

Go to Advanced configuration—Reboot device to see an interface as shown below 
Click “Reboot device” button to reboot the device. 

Summary of Contents for IP POWER C Series



































Reviews:

No comments

Brands by name

Popular brands

Load more brands