42
Bit per Second:
It is 9600 for most of PTZ cameras.
But a few can have different values.
Refer to camera manual.
Select the port used for PTZ camera.
Camera ID:
Leave it as it is if only one PTZ camera is used. Otherwise,
give each camera a different number.
Restore as Previous:
Set time period to move camera back to initial position after
a certain period of time.
Use homepreset:
Tick the box and set homepreset
set (Select preset as home preset).
[PTZ Camera Setup]
When using a PTZ camera, check the box and select a model name.
MagicRadar DVR system supports nearly 40 different protocols.
Apply All:
The same settings will be applied to the rest of the cameras by clicking on “Apply All”.
Summary of Contents for 9030
