Eyecon 9420 Instruction Manual Download Page 15

Page: 15 / 146

Eyecon 9420 & 9430 Instruction Manual

2.4 Preparing the Eyecon for use

2.4 Preparing the Eyecon for use

Insert the 10’ long power cable into the receptacle on the back of the Eyecon.

Refer to

Figure 2.4

The Eyecon must be installed near an easily accessible socket outlet. Plug the

Eyecon power cord into the outlet.

Figure 2.4 Power connector

Protective Earthing is provided by the Earthing pin of the IEC60320 type

appliance inlet.

2.5 Turn on the Eyecon

When you plug in the Eyecon, the unit will power up in five to ten seconds. There is no

need to press the pushbutton on the back of the unit.

Do not use the pushbutton to turn off the Eyecon. Refer to

Figure 2.4

for the

power connector location. The Eyecon is designed to be turned off through the

touch screen menus. Refer to page

for details on shutting down the Eyecon.

If power is lost or the unit has been shut down, fully depress and release the

power pushbutton to turn on the Eyecon. Refer to

Figure 2.5

for power

pushbutton location

Summary of Contents for 9420



















































































































































Search results

Summary of Contents for 9420

Reviews:

Eyecon 9420, Instruction Manual, Page: 15 / 146

Search results

Summary of Contents for 9420

Reviews: