Eyecar M1, User Manual

Page: 13 / 25

1. If the power cable is connected, after inserting SD CARD in the body, the violet LED lights.
2. Video Recording starts with “Starting CAR DVR” voice guide after connecting the power cable.
3. GPS receiving starts after blue LED Lights ON with “GPS data is successfully transmitted” voice guide.
Function of each part
13
│Preparation Recording│
1. When the amount of recorded data exceeds the capacity of the SD memory during constant and
event recording, the oldest files get overwritten.
2. If the impluse sensed by G-Sensor exceeds a specific limit or the user presses the emergency button(
△
),
the 2 minutes video file which is recorded 30 seconds before and after event stored and the tranferred to
the EVENT folder.
3. When the user turns off the engine or disconnects the power cable from the cigarette lighter socket, violet LED
lights and product is off. After the Violet LED is out, remove the SD card from the body. Unless the instructions
above are not observed, the problem on storing video image may happen
4.Connect the SD card to a PC, using the memory card reader. The user can then play the stored video file
with the normal muti-media program or exclusive program embedded in the SD card.
The user can check not only image data but find impact and location information through exclusive viewer
program.
│Video Recording and Playing│
-
We recommend to use a USB reader that supports SDHC2.0