FHD
Series Floodlight
EQS3367 Rev: 1 4/27/2015
1
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS:
This equipment is intended to be installed by qualified personnel. The installation
must be made in accordance with the current edition of the National Electric Code, and all applicable state and local building codes.
The final installation must be approved by the appropriate, qualified, electrical/building inspector(s). Improper Installation may
result in a risk of fire or electrical shock hazard. The instructions provided herein are made available for reference when installing
the FHD Heavy Duty Flood Light. If any portion of these installation instructions is unclear then do not proceed with the installation
and contact an EYE Lighting Representative at
1-888-665-2677
.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS BEFORE STARTING INSTALLATION
WARNINGS AND CAUTIONS:
CAUTION
– RISK OF SHOCK – DISCONNECT POWER BEFORE INSTALLATION
Failure to provide proper luminaire grounding may result in serious personal injury.
Maintain minimum distance of 0.5 m (1.6 ft) from walls or any other flammable surface.
Maintain minimum distance of 1.0 (3 ft) from lighted objects.
Do Not operate with cracked and/or broken glass cover.
Do Not Install close to a Heat Source.
Do Not use the luminaire to support ones weight, do not hang onto luminaire. Wear proper equipment, including
safety glasses and gloves, when installing and servicing luminaire.
Improper installation and/or utilization may void manufacturer’s warranty.
Use secondary safety chain or cable, as needed, when securing floodlight.
Allow sufficient cool down time prior to handling and/or servicing floodlight.
SUITABLE FOR MOUNTING WITHIN 1.2 m (4 ft) OF THE GROUND
DO NOT OPPERATE
IF CRACKED OR BROKEN
Tools required:
Installation is completed using ordinary tools including:
Ratchet wrench (with 12mm Socket head) or
an adjustable Crescent wrench.
Torque wrench capable of 11 NM (8.11 ft-lbs.)
No. 8 Metric or 5/16 SAE Allen Wrench
Wire Strippers
#2 Phillips Screwdriver
Before Installation:
Inspect luminaire for defects prior to installation. It is unlikely that mount arm or covers have
loosened during shipment, visually inspect. If defects are noticed then do not install and contact
the manufacturer immediately.
Weight
14.7 kg ( ~ 32.4 lbs.)
Input Voltage / Frequency
120 – 277 Vac / 50-60 Hz
Wattages
185W, or 230W
IF GLASS IS CRACKED OR BROKEN DO NOT OPPERATE CALL MANUFACTURE FOR REPLACEMENT GLASS
