USB-MUXDIAG-II – User guide
16/05/2012
00283735-v1
14
Document confidentiel appartenant à Annecy Electronique S.A.S.
Ne peut être diffusé, copié intégralement ou en partie sans autorisation expresse préalable
5.4.1.
Functional description
Principle of flashing LEDs on the remote:
During a total period of 1 second, each diode can turn on 1, 2 or 3 times during 250ms to
indicate the following modes:
mode A for a slow flashing,
mode B for a quick flashing.
Operation of the 6 top LEDs
Power
1)
The green “
Power
” diode lights
fixed light
to mean the power of the logging device. It stays
OFF
when the datalogger is in “Stand-by” mode
Record
1)
The blue “
Record”
diode stays
OFF
if no recording is in progress.
2)
The blue “
Record”
diode lights
fixed light
during the recording period, until receiving a stop
condition.
3)
The blue “
Record”
diode
flashes rapidly (mode B)
, during the recording phase of post-trig,
since the presence of the stop condition until the timer expires.
ERROR
1)
The red “
Error
” diode lights
fixed light
when a technical problem occurs in the datalogger:
a.
Full memory error
b.
Loss of I2C communication
2)
The red “
Error”
diode
flashes rapidly (mode B)
, in case the associated box or interface does
not have any “
DLC
” license.
3)
The red “
Error
” diode stays OFF at the moment of powering the datalogger.
1 s
250 ms
A
B
