Installation & User Manual, Radio Remote RC11E
Page 10
How to use a bowthruster
1. Turn the main power switch for the bow thruster on. Turn on the power to the receiver.
2. Turn on the transmitter by pushing the transmitter’s two “ON” buttons. The remote system is
now activated and then turns off automatically appr. 4 min. after the last usage (see page 9).
3. Please take some time to exercise thruster usage in open water to avoid damages to your boat.
4. Turn the bow in the desired direction. By pushing the red button for port movement or the
green button for starboard movement.
How to use the windlass
Please consult your windlass manual for use and precautions.
NB: Max. load on the windlass signal output is 4A!
If the windlass requires more than 4A, use extra control relay (ref. llustration next page)
Remote Control Deactivation
Push the transmitter’s “OFF” button for two seconds (the remote control deactivates automati
-
cally after approx. 4 minutes after the last usage). Turn off the power switch for the receiver.
• If in doubt, try in open water first!
Remote control “ON”
Turn boat to Port
Windlass
Remote control “OFF”
Turn boat to Starboard
Auto-OFF
appr. 4 min.
Down
Up
Hold for
2 seconds
