22
Figure 19.
Replace the clear photo ID cover, Figure 20.
Figure 20.
Tighten the captive screw - Do not over-tighten.
4.8
Transport
All iTAG X30 must be transported and stored such that they are not subjected to any
excessive mechanical or temperature stresses.
4.9
Authorised persons
Only persons trained for the purpose are authorised to handle the iTAG X30. They
must be familiar with the unit and must be aware of the regulation and provisions
required for explosion protection as well as the relevant accident prevention
regulations.
4.10
Cleaning and maintenance
The iTAG X30 and all its components require no maintenance and are self-monitoring.
Any work on the iTAG X30 must be carried out and performed by Extronics approved
personnel. The cleaning interval depends on the environment where the system is
installed. A damp cloth will usually suffice.
Summary of Contents for iTAG X30
