extronics iSCAN201 User Manual Download Page 10 | Manualshive

Page: 10 / 27

extronics iSCAN201 User Manual Download Page 10

Operating Instructions_iSCAN201_001

9

3 System assembly

3.1 System assembly 1

Overview of the complete
system assembly 1,

Bluetooth handheld scanner
iSCAN201

Assembly with base charging

station and power supply in
hazardous area

Description:

The Bluetooth handheld iSCAN201 was designed for use in hazardous areas. Normal operation requires a base
charging station, a connection cable between the base charging station and the iSCANPS power supply, and a
connection cable between the power supply and a PC.

Required connection cable to a PC:

USB: 0.2 - 2.5 mm², 4-wire

or RS232: 0.2 - 2.5 mm², 3-wire

The Bluetooth handheld scanner, the base charging station and the power supply can be connected and operated
in the hazardous area. For safe installation of the power supply please refer to the manual issued by SICK AG
(www.SICK.com)

The warnings and notes of caution contained in these operating instructions and in the
manual issued by SICK AG (www.SICK.com) must be adhered to.

For the professional use of the power supply iSCANPS the operating instructions of the
manual of the power supply are necessary.

«
...
8
9
10
11
12
...
»

Summary of Contents for iSCAN201




























Reviews:

No comments