Extron electronics XTP T VGA, User Manual, Page: 12 / 42

XTP T VGA Transmitter • Installation 4
Installation
This section contains installation procedures for the XTP T VGA and wiring details. Topics in
this section include:
• Rear Panel Connectors
• Connection Details
The XTP T VGA can be placed on a tabletop or mounted in a rack or under a desk (see
Mounting on page 33).
Rear Panel Connectors
POWER
12V
1.0 A MAX
Rx G Tx
RS-232
IR
Rx Tx
AUDIO
LOOP THRU
UNIVERSAL
XTP T VGA
LAN
SIG LINK
XTP OUT
RESET
INPUTS OVER XTP
A B C D E F
G
A
Universal video connector
B
Analog 15-pin HD loop-through
connector
C
Analog audio input connector
D
RS-232 and IR Over XTP connector
(page 5)
E
XTP output connector (page 5)
F
LAN connector (page 5)
G
Power connector and LED
(page 5)
Figure 2. XTP T VGA Rear Panel Connectors
A
Universal video connector — Connect a video source to the 15-pin HD connector. It
accepts RGBHV, RGsB, RsGsBs, RGBS, RGBcvS, YUVi or YUVp/HDTV, S-video, and
composite video (see
Universal Video Wiring on page 6) signals.
B
Analog 15-pin HD loop-through connector — Connect a video display to the
15-pin HD connector for a local monitor display of the universal analog video input.
C
Analog audio input connector — Connect an analog stereo audio source to the
3.5 mm tip-ring-sleeve (TRS) jack.
Tip (+)
Sleeve ( )
Sleeve ( )
Ring (-)
Tip (+)
Audio Plugs.eps
RCA Connector
3.5 mm Stereo Plug Connector
(balanced)
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 3. Wiring for the Analog Audio Connector