Peripherals Menu
Click
Peripherals
on page 43) to open the
Peripherals
Settings
dialog box to manage remote keyboard and mouse communications on a
VN-Matrix 200/225 (see figure 41).
NOTE:
Mouse and keyboard functions are supported by VN-Matrix 2
xx
series devices
only. For a complete description, see the device user guide at
Encoder
Decoder
w
x
y
v
w
x
y
v
z
u
Figure 41.
Peripherals Dialog
Serial Port
This panel (see figure 41) configures the RS-232 port on VN-Matrix encoder and decoder
devices. For a full description of the serial port configuration, including server/client setup,
see the User Guide for the device. Default settings are shown in figure 41.
1
Mode:
— The serial port can operate in one of three modes:
•
None:
The serial port is not used.
•
Pass‑through server:
The serial port acts as a destination for serial port clients.
•
Pass‑through client:
The serial port connects to server serial ports on other
devices.
A point to point link can be established by setting the serial port of one VN-Matrix device
to pass-through server mode and a second device to pass-through client mode. The
destination of the second device is set to the pass-through port on the first (server) device.
VNM EC 200 • Device Configuration and Control
58
Summary of Contents for VNM EC 200
Page 6: ......