Device Configuration
The next section describes the general configuration of VN-Matrix devices and applies to
VN-Matrix hardware encoders, decoders, and codecs. For details on the configuration
of the VNM-250 see
on page 67; for VN-Matrix recorders
see
on page 82; and for software decoders see
Software Decoder Configuration
on page 86. For a full description of a specific
function, see the user guide for the device.
The menus change slightly between the encoders, decoders, and codecs. Where
differences exist, they are noted.
VNM 200/225/300/325 Configuration
Info Menu
Click
Info
on page 43) to open the
Device
Information
dialog box
to display basic information for the selected VN-Matrix device (see figure 33).
192.168.0.31
1021150
device1021150
Active
Good
Device ID:
VNE 250 (only)
Device Name:
IP Address:
Device Status:
Device ID:
Link Status:
Link Status:
Good
Device Name:
LAN 1 IP (Control):
Device Status:
LAN 2 IP (Streaming):
2001329
VNE250_1
Active
192.168.0.31
192.168.0.1
1
1
2
2
3
3
4
4
5
5
Figure 33.
Device Information (Encoder or Decoder Shown)
The following fields are read-only (cannot be edited).
1
Device ID
— Displays the device ID number of the selected device.
2
Device Name
— Displays the name of the selected device.
3
IP Address
— Displays the IP address of the selected device.
4
Device Status
— The status of the selected device. Normally it shows
Active
and
the quality of the link is indicated in the
Link
Status
field. If the device is missing or
cannot be contacted on the network, it shows
No
Device
.
5
Link Status
— A link status of
Good
indicates little or no management packet loss.
A link status of
Fair
indicates a small amount of packet loss. A link status of
Poor
indicates a bad link; investigate whether the link to the device has sufficient bandwidth
to carry the data and management traffic.
VNM EC 200 • Device Configuration and Control
45
Summary of Contents for VNM EC 200
Page 6: ......