Command and Response Table for SIS Commands
Command
ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Information Requests
Request part number
N
X@
]
Show the extender part number
X@
.
For
X@
:
Transmitter:
60-1471-12
Receiver:
60-1471-13
HID Only Transmitter:
60-1539-12
HID Only Receiver:
60-1539-13
AAP Transmitter, black:
60-1472-12
AAP Transmitter, white:
60-1472-13
AAP Receiver, black:
60-1472-22
AAP Receiver, white:
60-1472-23
Decorator-style Transmitter:
60-
1473-13
Decorator-style Receiver:
60-1473-
23
Query firmware version
Q
n.nn
]
Show the firmware version, expressed to
the second decimal place.
Example:
Q
1.01
]
The unit firmware version is
1.01
.
Query firmware version
and build
*Q
n.nn.nnnn
]
Show firmware version and build number.
Peripheral Emulation (Transmitters Only)
NOTE:
These commands can be issued only to the transmitter.
Set peripheral emulation
E
E
X!
USBC
}
Usbc
E
X!
]
Set peripheral emulation for the
USB Extender Plus T to
X!
. For
X!
:
0
= disabled
1
= enabled (default)
View peripheral
emulation
E
E
USBC
}
X!
]
Network Pairing
Enable 1:
N
network
pairing
E
N
X!
USBC
}
Usbc
N
X!
]
Enable or disable pairing of the transmitter
with receivers via the network. For
X!
:
0
= pairing disabled
1
= pairing enabled (default)
View 1:
N
network
pairing
E
N
USBC
}
X!
]
Resetting
NOTE:
This command must be issued to both the transmitter and the receiver.
Reset device settings to
factory defaults
E
ZXXX
}
Zpx
]
Reset the extender to factory default
values while retaining pairing and IP
settings.
Absolute system reset
E
ZQQQ
}
Zpq
]
Reset all extender settings to factory
defaults except firmware version.
Upload Firmware
Upload firmware
E
UPLOAD
}
...go
Upl
]
Upl
]
is displayed after the upload is
complete.
USB Extender Plus Series • Remote Configuration and Control
25
Summary of Contents for USB Extender Plus Decorator-Style
Page 6: ......