Extron electronics TLP Pro 1022T, User Manual

Page: 19 / 33

Display
Press the
Display
button in the navigation panel at the top of the screen to open the
Display
screen.
Status
Display Audio Advanced Exit
Network
Auto Brightness
On Off
Wake on Motion
On Off
LCD Brightness
2
3
4
Minutes
Sleep Timer
On Off
0 50 100
Figure 9. Display Screen
The
Display
screen allows you to set the
Sleep Timer
,
Auto Brightness
,
LCD Brightness
, and
Wake on Motion
.
•
Sleep Timer — determines how long the panel is inactive before it enters sleep mode,
when the screen goes dark to save power. Toggle between
On
and
Off
. If the sleep timer is
On
, use the arrows to adjust the value between
1
and
120
minutes.
•
Auto Brightness — provides a suitable amount of backlighting that is automatically
calculated from the amount of ambient light detected by the light sensor (see figure 2 ,
C
on page 4).
•
LCD Brightness — allows you to adjust the screen brightness, using the slider control.
•
Wake on Motion — activates the panel from Sleep mode when motion is detected near the
unit. Toggle between
On
and
Off
.
TLP Pro 1022 Series • On-screen Menus 11