SMP 111 • Web-Based User Interface
60
Alarms
The
Alarms
page within
Troubleshooting
displays a list of alerts for events as
determined in
Configuration
>
Alarms
and
Traps
>
Alarm
Message
List
. Alarm
list entries here are read-only, but alarms can be muted or cleared. The alarm list can be
sorted, filtered, searched, or exported to a comma-separated values (CSV) file.
To open this page, click the
Troubleshooting
tab (see figure 57) at the top of the
SMP 111 embedded web pages, then click the
Alarms
tab on the second tier of tabs.
Figure 57.
Troubleshooting Tab, Alarms Subtab
The
Alarms
page opens, showing filtering controls and the alarm history list.
1
2
3
Figure 58.
Troubleshooting, Alarms>Alarm History
•
Active, unresolved alarms are displayed as red text (see figure 58,
1
).
•
To clear or remove an alarm, click the row it is listed in and click
Clear
Selected
Alarm(s)
(
2
).
•
To mute an alarm, so that it does not appear in the alarm list again the next time it is
triggered, select the
Muted
checkbox (
3
) for that alarm.
NOTE:
See the
SMP 111 Embedded Web Pages Help File
for further information about
the
Alarms
page.
figure 57
figure 58
