3
6.
For extra stiffening, attach the metal reinforcing plate connection bracket to the back of the SB 33 A 82-90 or SB 33 A 90-100
wall plate.
Left piece of Wallplate
(with level bubble)
Bolt
Wingnut
Lock
Washer
Right piece of Wallplate
(without level bubble)
Reinforcing
Plate
Figure 4.
Attaching the Reinforcing Plate
7.
Install the SB 33 speaker wallplate to the short L-bracket using two bolts, two lock washers, and two wingnuts, as shown in
figure 5. Repeat this procedure for the other short L-bracket on the other side.
TOP
DISP
LAY
(REAR)
Lock
Washer
Wallplate
Wingnut
Short
L-bracket
Bolt
Long
L-bracket
Figure 5.
Installing the SB 33 Speaker Wall Plate
8.
Fasten the display onto the VESA wall mount that was attached in
on page 1.
4
5
