Extron electronics SMD 101, User Manual

Page: 17 / 162

D
IR Receiver Window — Allows remote operation using an optional compatible IR hand
control.
E
Config port — Connect a control PC or other USB device to this port using a
Mini-B USB cable (not supplied). Use this port to send Simple Instruction Set (SIS)
commands to the SMD 101 for device configuration and control.
• For information on connecting a control PC or other USB device to this port, see
the
Front Panel Configuration Port section on page 112.
•
For information on SIS commands, see Remote Communication and Control on
page 111.
Rear Panel Features
The rear panel of the SMD 101 is shown in figure 3 below.
12V
1.0A MAX
POWER
HDMI
L R
AUDIO
Tx Rx G S G
RS-232
RESET
IR IN
LAN
OUTPUTS
G G G A A A B B B C C C D D D E E E F F F
A
12 VDC power connector
E
RS-232 connector
B
HDMI output connector
F
Reset button and LED
C
Analog audio output
G
RJ-45 LAN connector
D
IR receiver input
Figure 3. SMD 101 Rear Panel
A
12 VDC power input — Connect the provided 12 VDC power supply to the rear panel
3.5 mm, 5-pole captive screw connectors. When power is connected, the front panel
power indicator lights green (see
figure 2 ,
A
on page 9).
AC Power Cord
Ground
+12 VDC
External
Power Supply
(12 VDC, 1 A )
POWER
12V
1.0A MAX
Rear Panel
Power Receptacle
Figure 4. Power Supply Connection
figure 3
SMD 101 • Panels and Cabling 10