
ShareLink 200 N • Using the Embedded Web Pages
26
Device Setup
1
1
1
2
2
2
3
3
3
Figure 20.
Device Setup Panel
1
Device Setup panel
•
Resolution
— Change the output resolution (resolution is set to 720p by default).
Click the drop-down menu to show other resolutions.
•
Code
— Customize the login code that is displayed on the standby screen at
,
8
on page 6). Three options are available for the login code:
•
Disable
— No login code is required to connect to the ShareLink 200 N.
•
Random
(default) — A new random code is generated when the last user
disconnects from the ShareLink 200 N. For example, User 1 logs in with the
current code, then user 2 logs in with the same code. When users 1 and 2
disconnect from the ShareLink, a new code is generated.
•
Use the following code
— Enter a custom 4-digit login code.
2
Date and Time Settings panel
•
Choose
SNTP/NTP Server Synchronization
to specify the time server, or
choose
Disable
to disable this feature.
NOTE:
SNTP/NTP (Simple Network Time Protocol/Network Tie Protocol) is
used for synchronizing the clocks of computer systems over networks.
•
Server
(if SNTP/NTP Server Synchronization is enabled) — Enter the NTP server
address into this field.
NOTES:
•
If the NTP server address is in the form of a URL, a DNS server address is
required
to sync to the NTP server (for example, enter “pool.ntp.org”).
•
If the NTP server address is in the form of an IP address, a DNS server
address is
not required
to sync to the NTP server.
•
Time Zone
(if SNTP/NTP Server Synchronization is enabled) — Select the
appropriate time zone.
•
Daylight Saving Time
— Enable or disable the Daylight Saving Time option.
3
Terminal Refresh (Reboot) panel
This feature refreshes the terminal and reboots the system.
•
Auto
(default) — Device automatically refreshes when a user is not connected and
no user is sharing.
•
Time Set
— Schedule a specific time to refresh the terminal (specify that time in
the
Time
field using the drop-down lists).
PRELIMINARY
Summary of Contents for ShareLink 200 N
Page 6: ...PRELIMINARY ...