Extron electronics RGB 130xi User Manual Download Page 37

RGB 130

xi

xi

xi

xi

xi     

 , 134

xi

xi

xi

xi

xi     

 , 150

xi  

xi  

xi  

xi  

xi  

Appendix

FCC Class A Notice

Note:  This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.  These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial  environment.  This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his
own expense.

Note:  This unit was tested with shielded cables on the peripheral devices.  Shielded
cables must be used with the unit to ensure compliance.

Extron’s Warranty

Extron Electronics warrants this product against defects in materials and
workmanship for a period of two years from the date of purchase.  In the event of
malfunction during the warranty period attributable directly to faulty workmanship
and/or materials, Extron Electronics will, at its option, repair or replace said products
or components, to whatever extent it shall deem necessary to restore said product to
proper operating condition, provided that it is returned within the warranty period,
with proof of purchase and description of malfunction to:

Extron Electronics
1230 South Lewis Street
Anaheim, CA 92805, U.S.A.

This Limited Warranty does not apply if the fault has been caused by misuse,
improper handling care, electrical or mechanical abuse, abnormal operating conditions
or non-Extron authorized modification to the product.

If it has been determined that the product is defective, please call Extron and ask for an
Applications Engineer at (714) 491-1500 to receive an RA# (Return Authorization
number).  This will begin the repair process as quickly as possible.

Units must be returned insured, with shipping charges prepaid.  If not insured, you
assume the risk of loss or damage during shipment.  Returned units must include the
serial number and a description of the problem, as well as the name of the person to
contact in case there are any questions.

Extron Electronics makes no further warranties either expressed or implied with
respect to the product and its quality, performance, merchantability, or fitness for any
particular use.  In no event will Extron Electronics be liable for direct, indirect, or
consequential damages resulting from any defect in this product even if Extron
Electronics has been advised of such damage.

Please note that laws vary from state to state, and that some provisions of this
warranty may not apply to you.

Summary of Contents for RGB 130xi







































Reviews: