MSG Matrix Switchers • Windows-based Control Program
4-7
VIS Enable
The current state of VIS (Vertical Interval Switching) is indicated by the presence or
absence of a checkmark next to
VIS Enable
on the Options menu. If a checkmark
appears, VIS is enabled. If a check mark does not appear, VIS is disabled. To toggle
VIS on or off, click
VIS Enable
with your mouse pointer.
Vertical interval switching requires a Genlock signal from a blackburst
generator or similar device.
Enable Response
The current state of the view response option is indicated by the presence or
absence of a checkmark next to
Enable Response
on the Options menu. If a check
mark appears, you will be able to view responses from the switcher when using
terminal communication (see Using Terminal Comm below). If a checkmark does
not appear, you will not be able to view responses from the switcher. To toggle the
view response option on or off, click
Enable Response
with your mouse pointer.
Using Terminal Comm
The Terminal window is used to view ICS100 commands as they are sent to the
switcher, and to view responses as they are received from the switcher. To use the
Terminal window, click on
Terminal Comm
from the Options menu
.
The Terminal
window opens.
In addition to viewing commands that are sent and received from the ICS100
Control Program, the Terminal window also allows you to save macro commands
or a communication session and recall it for repeated or future use. Refer to ICS100
Control Program Help for additional information on terminal communication.
Resetting the unit
1.
From the Options menu, click on
Reset Unit
. A pullout menu appears.
2.
To partially reset the switcher (restore all parameters to factory default, except
input volume settings) select
Partial Reset
from the pull out menu.
3.
To fully reset the switcher (restore all parameters to factory default) select
Full
Reset
from the pull out menu.
ICS100 Control Program help
For information about program features, you can access the help program from
within the ICS100 Control Program, click on the
Help
tab on the main screen, then
select
Help
from the drop-down menu.
Summary of Contents for MSG0804
