2.
If the disc does not start automatically, run LAUNCH.EXE from the disc.
3.
Follow the instructions that appear on the screen.
By default, the installation creates a
C:\Program Files\Extron\DSP_
Configurator
directory and places a shortcut icon in it.
NOTE:
During initial installation, the user is asked if they wish to install the USB
drivers or not. You should accept the installation, as these drivers are essential
for connecting to a PC or control device via the front panel mini USB port of
the MLS 608 D unit.
Installation from the Website
1.
On the Extron website (
Download
tab.
2.
On the Download Center screen, select
Software
from the left side-bar menu.
3.
Locate the DSP Configurator program file from the list and click on it.
4.
Follow the on-screen instructions to download the program to your PC.
Click
Start > Programs > Extron Electronics
> DSP_Configurator > DSP Configurator.exe.
Alternatively, if an icon was installed on the desktop, double-click
the icon to start the DSP Configurator program.
The device selection window appears.
5.
Select the appropriate device from the drop-down list and click
OK
.
NOTE:
To exit without starting the program, click
Cancel
.
DSP Configurator opens to the default Audio & Video I/O workspace, in Emulate mode
). This workspace is a blank configuration for the selected
device.
NOTE:
The green box in the top right corner of the workspace identifies the current
mode, “Emulate” or “Live.”
MLS 608 D Series • DSP Configurator
45
