![Extron electronics MLS 306 User Manual Download Page 42](http://html1.mh-extra.com/html/extron-electronics/mls-306/mls-306_user-manual_2457063042.webp)
Specifications, Part Numbers, and Accessories, cont’d
MediaLink Switchers • Specifications, Part Numbers, and Accessories
A-4
Gain error ...................................... ±0.1dB channel to channel
Maximum level (Hi-Z) ................ > +21dBu, balanced at stated %THD+N
Maximum level (600 ohm) ......... > +15dBm, balanced at stated %THD+N
0dBu = 0.775 volts (RMS).
Audio output — power amp (MLS 506MA & MLS 506SA)
Number/ signal type
MLS 506MA ...................... 1 mono
MLS 506SA ....................... 1 stereo
Connectors… ................................ 4 position screw terminal
Drive (full power out)… ............. At less than 0.5% THD from 20-20kHz:
MLS 506MA (70V, mono) .. 30 watts; 70V distribution
30 watts @ 4 or 8 ohm load
MLS 506MA (100V, mono) 30 watts; 100V distribution
30 watts @ 4 or 8 ohm load
MLS 506SA (stereo) ......... 60 watts; 30 watts per channel @ 4 or 8 ohm load
0dBu = 0.775 volts (RMS).
Control/remote — switcher
Serial control port ........................ 1 RS-232, female 9-pin D connector (shared with contract closure port)
1 3.5 mm captive screw connector, 5 pole (for control via MLC 206; shared
with IR control port)
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations 2 = TX, 3 = RX, 5 = GND
Contact closure ............................ 1 female 9-pin D connector (shared with serial control port)
Contact closure pin configuration… pin 1 = input 1, pin 4 = input 2, pin 5 = ground, pin 6 = input 3,
pin 7 = input 4, pin 8 = input 5, pin 9 = input 6
IR control port .............................. 1 3.5 mm captive screw connector, 5 pole (shared with the MLC/IR serial
control port)
Program control ........................... Extron’s control program for Windows®
Extron’s Simple Instruction Set™ – SIS™
General
Power ............................................. 100VAC to 240VAC, 50/60 Hz, internal, auto-switchable
MLS 506SA ....................... 50 watts
All other models .............. 25 watts
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Ope32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount ................................... Yes, with included brackets
Enclosure type .............................. Metal
Enclosure dimensions
MLS 306 ............................. 1.75” H x 17.5" W x 9.4" D (1U high, full rack width)
4.4 cm H x 44.4 cm W x 23.9 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.)
MLS 506 Series ................. 3.5” H x 17.5" W x 9.4" D (2U high, full rack width)
8.9 cm H x 44.4 cm W x 23.9 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight
MLS 306 ............................. 5.5 lbs (2.5 kg)
MLS 506 ............................. 7.0 lbs (3.2 kg)
Summary of Contents for MLS 306
Page 1: ...MLS 306 MLS 506 MLS 506MA MLS 506SA MediaLink Switchers 68 598 01 Printed in the USA...
Page 5: ...MediaLink Switchers 1 Chapter One Introduction About the MediaLink Switchers Features...
Page 28: ...Operation cont d MediaLink Switchers Operation 3 8 Troubleshooting x...
Page 48: ...Labeling cont d MediaLink Switchers Labeling B 4 This page is left blank intentionally...