QS-1
Quick Start Guide — MLP 101
MLP 101 Series • Quick Start Guide
To install and set up the MLP 101, follow these steps:
Step 1
Disconnect the MLP 101
from any power source.
Step 2
Mount the MLP 101
on a rack or under a desk as illustrated below.
Rack Mount
(2) 4-40 x 3/16"
Screws
Use 2 mounting holes on
opposite corners.
VersaTools Rack Shelf
1/4 Rack Width Front
False Faceplate
Under Desk
Back of Rack Mount
N
See “Mounting the MLP 101” in chapter 2 for additional
information.
Step 3
Connect the microphone to the MLP 101
mic input. See the
diagrams below for wiring instructions.
W
For unbalanced audio, ensure that the Phantom power
switch is set to the “off” position.
Hot
Cold
Unbalanced Input
(high impedance)
Hot
Cable Shield
Cold
Balanced Input
(high impedance)
(5 mm) MAX
Captive Screw
Connector stripping
0.2”
