For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
on the Extron website.
© 2020 Extron — All rights reserved.
All trademarks mentioned are the property of their respective owners.
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
To recall a saved preset
, press the
Preset
Recall/Save
button and immediately release it. The button lights orange, and the
LCD window displays
Window
Preset/Recall
#
nnn
. Rotate either
Adjust
knob to select a preset number, then press
Enter
. The
Enter
button lights orange and remains lit until the window preset is recalled, then both buttons turn off.
SIS Commands
As an alternative to the front panel controls, you can issue SIS commands via RS-232, USB, or Ethernet from the computer to set
up the MGP 641 (see the
MGP 641 User Guide
at
for a complete list of SIS commands).
Command
ASCII (Telnet)
Response
Additional Description
Mute (blank) a window
X!
*B
X!
Vmt*1
]
Blank (mute) window
X!
.
Unmute a window
X!
*0B
X!
Vmt*0
]
Unmute window
X!
.
Save window preset
1*
X1$
,
Spr1*
X1$]
Save current window settings as preset
X1$
.
Recall window preset
1*
X1$
.
Rpr1*
X1$]
Recall window preset
X1$
.
Audio input switch
X!
$
In
X!
•
]
Select (switch) the audio from input
X!
.
Global audio mute
X$
Z
Amt
X$]
Set mute state of all audio outputs to
X$
.
Discrete audio mute
X@
*
X$
Z
Amt
X@
*
X$]
Set mute state of audio output
X@
to
X$
.
View global mute status
Z
X$
•
X$
•
X$]
View audio mute status:
HDMI
,
DTP
,
analog
audio
View discrete audio mute
X@
*Z
X$]
View mute status
X$
of audio output
X@
.
Set front panel lock mode
X3%
X
Exe
X3%]
Set front panel lock mode to
X3%
.
Read front panel lock
mode
X
X3%]
View front panel lock mode
X3%
.
Set IP address
E
X10&
CI
}
Ipi
•
X10&]
Set unit IP address
X10&
.
Read IP address
E
CI
}
X10&]
View the unit IP address (
X10&
).
Set subnet mask
E
X11#
CS
}
Ips
•
X11#]
Set unit subnet mask
X11#
.
Read subnet mask
E
CS
}
X11#]
View the unit subnet mask (
X11#
).
Set gateway address
E
X10&
CG
}
Ipg
•
X10&]
Set IP address
X10&
for your gateway.
Read gateway address
E
CG
}
X10&]
View the gateway IP address for your unit.
Reboot networking
E
2Boot
}
Boot2
]
Restart the network after IP setting or
DHCP changes.
KEY:
X!
= Input (window) number
1
- 4.
0
= all windows (mute and freeze only)
X@
= Output number
1
= HDMI output,
2
= TP output,
3
= Analog audio output
,
99
= All outputs
X$
= Mute status
0
= unmuted, 1 = muted
X1$
= Window preset number
1
-
128
X3%
= Front panel lock (executive) mode
0
= Off (front panel unlocked, default),
1
= Complete front panel lockout
2
= Only window preset recall, mute, freeze, and auto image are available.
X10&
= IP or gateway address
nnn.nnn.nnn.nnn
. Leading zeros are optional in each octet.
X11#
= Subnet mask
nnn.nnn.nnn.nnn
. Leading zeros are optional in each octet.
NOTE:
IP and subnet commands require a 2BOOT command before any changes are applied (see the Reboot
Networking command, above).
68-2396-50
Rev. A 10 20
4