below shows the order in which the screens appear at power-up and during the
default cycle.
60-1488-01
FW v1.00
2 sec.
Extron
MediaPort 200
70 sec.
Power
On
30 sec.
Video In: HDMI
1280x720@60Hz
USB Video Send
None
2 sec.
USB Audio Send
No Signal
USB Audio Return
None
2 sec.
Figure 65.
Power-up and Default Cycle Screens Example
Menus on the LCD Screen
The MediaPort 200 menus that are displayed on the LCD screen enable configuration and
operation of the product without the PCS software or SIS commands. The menu navigation
buttons (
Menu
and
Next
) are located to the right of the LCD screen. Press these buttons
to cycle through the available menus and submenus, and use the horizontal and vertical
Adjust
knobs to select items.
Menu System Overview
The menu system consists of eight menus, each of which have submenus that enable
desired adjustments to be made (see the
on the next page).
Using the Menus
1.
To access the menu system, press the
Menu
button on the front panel. The first menu
(
Quick
Setup
) is displayed on the LCD screen.
2.
Select other menus by repeatedly pressing the
Menu
button until the desired menu is
displayed.
figure 65.
Power-up and Default Cycle Screens Example
MediaPort 200 • Front Panel Operation
63
