IPI 200 Series • Installation Instructions
2
IPI 200 Series Installation Instructions, cont’d
Installation
Before installing your IPI 200, read the following publications, which can be found on the Extron Web site (
www.extron.com
):
IPI 100 Series and IPI 200 Series User’s Manual
•
IP Intercom System Frequently Asked Questions
•
W
Installation and service must be performed by authorized personnel only. These products must be used with
UL approved grounded electrical boxes.
The front panel of the IPI 204 is shown above, at left. The front panel for the IPI 201 is the same, except there is only one
button. The rear panels for both units are identical and are shown above, at right.
1.
Determine which rooms will have IP Intercoms and HelpDesk PCs and where, in each room, they will be located. Ensure
there is a network connection for each intercom and each HelpDesk PC.
2.
Connect the LAN port to the local network, using a standard network cable, with an RJ-45 connector.
3.
Connect power, and, if required, contact relay and local audio output, using the rear panel
captive screw connectors (see figure at right).
4. Mount each IPI 200 into furniture, an AAP wallplate, mounting bracket for 2-gang
wallplates, or device faceplate. The AAP versions must be secured by attaching a clamp
bracket to the back of the intercom after it has been inserted through the front of the AAP
plate.
5.
Ensure the HelpDesk PC(s) is connected to the network and power it on.
6.
Install the Extron IP Intercom HelpDesk software, which is on the disk that shipped with the unit and is also available for
download from the Extron Web site (
www.extron.com
)
7.
Use the IP Intercom HelpDesk software to configure all intercom units in the system. Full instructions can be found in
the
IPI 100 Series and IPI 200 Series User’s Manual
and also in the software’s Help File.
When the front panel button(s) light amber, the unit is correctly installed and configured. If the button(s) light red the unit
has not been correctly configured and you should check the
IPI 100 Series and IPI 200 Series User’s Manual
or the software’s
Help File.
Extron
USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517
FAX
Extron
USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797
FAX
Extron
Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050
FAX
Extron
Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664
FAX
Extron
Japan
+81.3.3511.7655
+81.3.3511.7656
FAX
Extron
China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566
FAX
Extron
Middle East
+971.4.2991800
+971.4.2991880
FAX
Speaker
Microphone On LED
Microphone
Push To Talk Buttons
Config Port
Extron IPI 204 AAP Intercom
(front panel)
POWER
RELAY
C NO
AUDIO OUT
LAN
Power
Contact
Relay
Audio Out
IPI 204 AAP, IPI 201 AAP
(rear panel)
LAN Port
AAP Mounting
Screws (4)
POWER
RELAY
C NO
AUDIO OUT
