Extron electronics IP Link IPL T PC1, User Manual, Page: 30 / 72

Using the IPL T PC1 Web Pages
The IPL T PC1 features an embedded web server, which includes factory set web pages.
These pages can be replaced with user-designed files, but the default web pages provide
many basic features for configuring, and controlling the PC1 via a web browser. This section
provides an overview of the embedded web pages.
To access the embedded web pages:
1. Launch a web browser (for example, Internet Explorer) on your connected computer.
2. On the browser Address line, enter the PC1 IP address.
If you have previously created a Global Configurator 3 project for the PC1, the web
page opens in the GlobalViewer format. To display it in the default web page format,
enter the PC1 IP address, followed by
/nortxe_index.html
.
Example:
10.26.188.44/norte_index.html
.
See the IPL T PC1 Setup Guide , delivered with your PC1, for information on using
Global Configurator.
NOTE:
• The factory configured passwords for all accounts on this device have been set
to the device serial number. In the event of a complete reset to factory defaults,
the passwords convert to the default, which is no password (see
Assigning
Passwords on page 29 to change a password).
• If a password remains, the Enter Network Password dialog box opens. If a
password has been removed, the PC1 web page opens, displaying the System
Status page. (Skip steps 3 and 4.)
3. Enter the administrator password in the
Password
field. Leave the
User Name
field
blank.
Figure 16. Password Prompt Window
4. Click
OK
. The PC1 web page is displayed.
NOTES:
• Passwords must contain 4 to 12 alphanumeric characters. Spaces and non-
alphanumeric symbols are not allowed, and the passwords are case sensitive.
• Administrators have access to all of the web pages and are able to make
changes to settings. Users can access only the System Status page.
16
IPL T PC1 • HTML Configuration and Control 22