Extron electronics IP Link IPL T PC1, User Manual, Page: 37 / 72

Assigning passwords
The
Passwords
screen allows you to assign passwords to the administrator and user
access levels.
NOTE: The factory configured passwords for all accounts on this device have been set
to the device serial number. In the event of a complete reset to factory defaults, the
passwords convert to the default, which is no password.
The administrator password gives access to all IPL T PC1 web pages, enabling the
administrator to configure the PC1.
The user password provides access only to the
System Status
web page. If you are logged
in as user, you see only the
Status
tab with the
System Status
page. You cannot make
any configuration changes.
To assign passwords:
1. On the
Configuration
page, select
Passwords
from the sidebar menu.
2. Enter the new administrator password in the
Administrator Password
field.
Passwords must contain 4 to 12 alphanumeric characters.
Spaces and non-alphanumeric symbols are not allowed, and the passwords are case
sensitive.
3. In the
Re-enter Admin Password
field, enter the same password again to confirm it.
Figure 22. Passwords Page with Administrator and User Passwords Entered
4. If you want to assign a user password, enter it in the
User Password
field.
NOTE: You cannot assign a user password unless an administrator password has
either been assigned or is being assigned at the same time.
5. Reenter the same user password in the
Re-enter User Password
field.
6. Click
Submit
to set the passwords.
Removing passwords
To remove a password:
1. On the
Configuration
page, select
Passwords
from the sidebar menu.
2. In the
Administrator Password
or the
User Password
field, delete the characters that
are there, and press the <
Spacebar
> to enter a space.
22
IPL T PC1 • HTML Configuration and Control 29