HAI 100 4K PLUS • Configuration
6
Configuration
The following HAI 100 4K Plus features can be configured to ensure that the sink devices can
handle the signal provided. Use
(see page 9) to make these configurations.
This section provides information on:
•
•
•
Output Compatibility Correction
•
Audio Insertion
The audio insertion setting determines whether audio from the analog audio input or S/PDIF
input is inserted, or if the original embedded audio is passed.
The following audio insertion settings can be configured using the
SIS command on page 14:
•
The default setting always embeds analog audio, replacing any existing embedded
digital audio.
NOTE:
The input analog audio signal gain can also be adjusted through SIS
command, from -18 dB to +24 dB in 1dB steps, prior to being embedded. The
default is unity gain (0 dB).
•
The Auto setting passes embedded audio when detected on the HDMI input and
reverts to analog audio when it is not detected.
•
The S/PDIF setting inserts audio from the S/PDIF input on the HDMI signal as is.
EDID Minder
EDID Minder allows a source device connected to the HAI 100 4K Plus input to continuously see
the EDID of a sink device, even if the sink is not physically connected.
By default, the EDID is set to 1080p @ 60 Hz with 2-channel audio.
EDID can be configured using PCS (see
Product Configuration Software
on page 17).
