FOX3 Matrix Series Switcher • Internal Web Page
45
Roles and Permissions Panel
The
Roles
and
Permissions
,
, on page 42) displays whether
Admin
and
User
passwords have been set. It does not display the actual password.
NOTE:
The following rules apply to passwords:
•
Length is 1-128 characters.
•
All human-readable characters are permitted except
|
.
•
The password cannot be a single space.
•
Passwords are case-sensitive.
•
If the
Admin
password is cleared, the user password is cleared as well.
•
The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is
extron
for the
Admin
and
User
.
To assign a administrator and user passwords:
1.
In the
Roles
and
Permissions
panel,
click
EDIT
(see figure 34). The
Role
and
Permission
Settings
dialog box opens.
2.
In the
Admin
panel, click the
Change
Admin
Password
link and enter the new
administrator password in the field below
(see figure 35).
3.
Click in the
Confirm
Admin
Password
field and enter the password from the
Change
Admin
Password
field.
Figure 34.
Roles and Permissions
Panel
4.
To assign a user password, repeat steps 2 and 3 in the
User
panel.
5.
When finished, click
SAVE
to
set the passwords. To close
the window without saving a
password, click
CANCEL
or the
X
in
the upper-right corner.
Passwords can be changed but they
cannot be removed entirely. The FOX3
must have passwords at all times.
These fields cannot be blank.
Figure 35.
Passwords Dialog Box
34
35
Summary of Contents for FOX3 Matrix 160x
Page 6: ......
