FOX3 Matrix Series Switcher • Internal Web Page
44
2.
Edit the network settings as desired:
a.
Click the
DHCP
on page 43) to toggle DHCP on
and off. When DHCP is enabled (On), the unit configures its IP address and other
network settings from the DHCP server. The default is Off.
b.
To set any of the addresses (
IP
Address
),
Subnet
mask (
), and
Gateway
address (
), click in the desired field and enter the address.
3.
When finished editing, click
SAVE
to confirm your changes or
CANCEL
to close the
window without making changes. Clicking the
X
in the upper-right corner of the screen
also closes the window.
Firmware Panel
The
Firmware
,
, on page 42) displays the current firmware
version and the date it was last updated. Update the firmware on the FOX3 Matrix from this
panel (see
Software/Firmware Installation
on page 30 to download the firmware files).
NOTE:
Firmware files for FOX3 Matrix have a .eff extension. Do not attempt to load any
other file types.
To update firmware:
1.
In the
Firmware
panel, click the
SELECT
FILE
button (see figure 32).
2.
In the
Open
dialog box, browse to
locate the new firmware file on your
computer (by default the file is stored at
C:\Program Files (x86)\Extron\
Firmware\FOX3 Matrix
after being
downloaded from the
Figure 32.
Firmware Panel
3.
Double-click the firmware file name.
The
Open
window closes, and the
selected firmware file name appears in
the
Update
Firmware
panel on the web
page.
4.
Click
UPDATE
cancel the update, click the
X
button in
the
Update
Firmware
panel.
During the updating process, a window
appears in the middle of the screen,
showing messages giving the progress
Figure 33.
Firmware Update Dialog Box
of the update:
Initializing
,
Installing
the
Firmware
, and
Rebooting
Device
.
When the update is completed, the message window closes and the message
Firmware
Upload
Complete
appears near the top of the screen. The new firmware
filename appears beside
Version
in the
Firmware
panel.
32
33
Summary of Contents for FOX3 Matrix 160x
Page 6: ......
